01
installing the porterrack
01 B
Once the bolt is through the hole in the rack, place a spacer on
the bolt threads. This spacer will sit between the bike frame and
the PorterRack.
01 A
With the PorterRack being held upright, place one bolt
through one of the top holes on the front of the rack.
Please note: If you are installing an older PorterRack, there
are various holes on the front plate. Be sure to use the ones
that line up with your bike’s frame.
2
Hardware included
(4) M8 X 45 mm bolts
(4) 20 mm Spacer (4)
Tools needed
5 mm Allen wrench (for installing rack bolts)
4 mm Allen wrench (for removing rubber plugs on frame)
Summary of Contents for Porterrack
Page 1: ...Porterrack Manual 2021 ...
Page 5: ......