01 C
Remove the rubber plugs from the mounting holes on the
head tube of the bike frame using a 4 mm Allen wrench.
Store these somewhere safe in case you need them again in
the future.
3
01 D
Bring the brake and derailleur cables to the center of the
head tube so that the cables will run between the empty
space that will be created between the top two bolts once
they are fully installed.
01 F
Place the other top bolt and washer through the front of the
PorterRack, slide the spacer over the threads on the back
side of the mounting plate and lightly thread the bolt into the
frame. Make sure the cables are running in between this bolt
and the other top bolt.
01 E
While holding these cables in the center of the head tube,
bring the bolt and spacer to the corresponding hole on the
frame and lightly thread the bolt into the frame.
Summary of Contents for Porterrack
Page 1: ...Porterrack Manual 2021 ...
Page 5: ......
