11
38
Use the provided Shimano lead-connector tool from the
small parts box to insert the display cable into the small port
under the display. You should feel a securing click when the
connection is made.
39
Replace your battery by sliding it into the cradle and rotating
towards the bike frame until it clicks into place.
36
Use a 4 mm Allen to loosen the faceplate on the front of your
stem, and center the positioning target. Then retighten
the faceplate.
37
Use a 3 mm Allen wrench to loosen the paddle grips.
Reposition them so they are level with the ground. Then
retighten them.
Summary of Contents for RFA
Page 1: ...RFA assembly Manual ...
Page 15: ......
