11
36
Four bolts are securing the tailpiece in place. Loosen these
four bolts using the 10 mm socket wrench and the 5mm
Allen wrench.
38
Insert the U-tube into the frame, pushing in on the spring pin
button so that the button slides into the frame as well. Insert
the U-tube far enough for the spring pin to pop out into the
hole on the bike frame. (Optional: You can apply grease to the
portion of the U-tube being inserted.)
37
Push or pull the tailpiece into a place where you can easily
insert the U-tube.
Do not tighten the tailpiece yet.
35
If your U-tubes do not seem to easily slide into the frame, you
will need to loosen the tailpiece on the back end of the bike
in order to acquire additional tolerance. This is the tail piece.
Summary of Contents for Stoker 2021
Page 1: ...stoker assembly Manual 2021 ...
Page 13: ......
