4
08
Remove all of the packaging from the seat post and saddle.
With the bike still in the box, install the seat post into the
frame. Use a 5 mm Allen wrench to tighten the seat post
clamp and secure the seat post in place.
10 - Install the front wheel
The rear wheel comes pre-installed. The front wheel is zip
tied to the bike frame. Cut these zip ties and remove the
wheel. Set the wheel aside nearby.
09
Remove the bike from the box and secure it in your bike
stand. Once in the stand, loosen the FreeLoader Too bag and
remove the U-Tubes.
11
Remove all padding and cardboard protection from the bike.
Summary of Contents for Stoker 2021
Page 1: ...stoker assembly Manual 2021 ...
Page 13: ......
