13
44
Insert the U-tube into the frame, pushing in on the spring pin
button so that the button slides into the frame as well. Insert
the U-tube far enough for the spring pin to pop out into the
hole on the bike frame. (Optional: You can apply grease to the
portion of the U-tube being inserted.)
43
Push or pull the tailpiece into a place where you can easily
insert the U-tube.
Do not tighten the tailpiece yet.
46
If you loosened the tailpiece to install the U-tubes, tighten
the tailpiece into place.
45
Insert the remaining U-Tube on the other side of the frame.
Summary of Contents for STOKER
Page 1: ...stoker assembly Manual ...
Page 15: ......
