19
4. Procedure of Operation
This chapter tells user how to use NuBAR-1000 in your test site.
4.1 Hardware Connection
4.1.1 For Self-Test
Before the real test, operator can connect the two devices directly by network cable (Cat. 5e or above is
suggested) for functional check.
4.1.2 For Single DUT
Without high cost desktop test equipment, the compact size NuBAR-1000 is able to do Ethernet network
test easily.
The test streams run through the two ports that join the test. If there are more than two port that need to
join the test simultaneously, other advanced model can fit user's requirement. Please contact with
distributor of Xtramus.
4.1.3 For Cable Wiring
To wiring a network cable in office or building, NuBAR-1000 is convenient for data transmission test. Do
this test to insure the transmission quality for real environment. To test the cable inside the building,
connect two sides of the cable to a pair of NuBAR-1000. If the test is passed, it also performs well in real
condition by real network device.
Servant
Lord
Cat. 5e or above
network cable
Lord
Servant
