XtraVac VT300 Vacuum Tumbler Operation and Parts Manual
XtraVac Packaging Machines
419 E. 11th Ave. North Kansas City, MO 64116 USA
VT 300 Vacuum Tumbler
+1 (800) 728-2999 Sales@XtraVac.com
13
one-thirds of the amount, please pour out the water.
4.2.3
、
The Cover gasket on the Air tightness cover should check very often. If there is defect
or damage , please replace it immediately.
4.2.4
、
It is about 3 months to change the large O-Ring (Page15-17) on the bushing
4.2.5
、
To check the O-Ring (Page15-35) of the inner bushing (Page15-34,36) inside the
vacuum tube each week, If there is defect, please replace it immediately.
4.2.6
、
Vacuum oil replacement.
4.2.3.1
、
Recommended vacuum oil: BP Engergol RC100, Esso Nuto H100, Mobil Rarus 427.
4.2.3.2
、
Drain the oil completely before filling new oil
4.2.3.3
、
Oil capacity should be kept at least two-thirds of total amount.
4.2.4
、
Change the oil of the vacuum pump for every 120 hours. Also check the oil level from
oil sight glass every week. Oil capacity should be kept at least two-thirds of total
amount. If the oil is dirty, please replace it immediately.
4.2.5
、
Cleaning Air exhaust tube: Withdraw the Fixing pin first, otherwise the tube is still fixed.
4.2.6
、
Detail drawing of the oil pump
1. oil filling hole
2. oil sight glass
3. oil draining hole
Summary of Contents for VT300
Page 1: ......
