background image

11

2. CAUTIONS AND ADVICES

Care and Maintenance:

- Always remove batteries from the toy when it is not 

being used for a long period of time. (Transmitter only)

- Regularly check the plug and other parts are not 

damaged. In case of damage, do not use the product 

until it has been repaired.

- Wipe the toy gently with a clean cloth.

- Keep the toy away from direct heat.

- Do not submerge the toy into water that can damage 

the electronic assemblies.

Special notes to adults:

- Before first use, Read the user’s information together 

with your child.

- This toy intended to be used in domestic area (house 

and garden) only.

- Assembly should be performed under adult 

supervision (changing batteries/ spare parts, trimming 

etc.).

- Parental guidance is recommended when installing or 

replacing batteries.

- Do not change or modify anything on the toy.

Battery warnings:

- Non-rechargeable batteries are not to be recharged.

- Rechargeable batteries are to be removed before 

being charged. (Transmitter only)

- Rechargeable batteries are only to be charged under 

adult supervision.

- Different types of batteries or new and used batteries 

are not to be mixed. (Transmitter only)

- Only batteries of the same or equivalent type as 

recommended are to be used.

- Batteries are to be inserted with correct polarity.

- Exhausted batteries are to be removed from the toy. 

(Transmitter only)

- The supply terminals are not to be short-circuited.

- Do not mix old and new batteries. (Transmitter only)

- Do not mix alkaline, standard (carbon-zinc) or 

rechargeable (nickel-cadmium) batteries. (Transmitter 

only)

This toy is equipped with a LiPo rechargeable 

battery, 

please pay attention to the following cautions for 

safety use:

- Do not dispose the battery in fire or heat.

- Do not use or leave the battery near a heat source 

such as fire or heater.

- Do not strike or throw the battery against hard surface.

- Do not immerse the battery in water, and keep the 

battery in a cool dry environment.

- When recharging, only use the battery charger 

specifically for that purpose.

- Do not over-discharge the battery.

- Do not connect the battery to an electrical outlet.

- Do not directly solder the battery and pierce the 

battery with a nail or other sharp object.

- Do not transport or store the battery together with 

metal objects such as necklaces, hairpins etc.

- Do not disassemble or alter the battery.

- Charge the battery every 6 months.

- Toy battey inside can’t be replaced

Notes:

- The toy may malfunction under electrostatic discharge 

interference. If the toy does not respond, reset it.

- Use new alkaline batteries in this toy to obtain best 

performance. 

- This toy must only be used with the recommended 

charger.

Batteries requirements (Transmitter):

Power supply:

Characteristics: DC 3V

Quality and type: 2 x 1,5V “AA”/LR6 (not 

included)

Battery requirements (Robot):

Power supply:

Characteristics: DC 3.7V

Quality and type: 1x3.7V Li-Po rechargeable 

battery (included)

Capacity: 600 mAh

The crossed-out dustbin symbol indicates 

that batteries, rechargeable batteries, button 

cells, battery packs, etc. must not be put in 

the household waste. Batteries are harmful to 

health and the environment. Please help to 

protect the environment from health risks. If the toy is out 

of use, please use common household tool to break the 

product for built-in rechargeable battery operated toy or 

unscrew the battery door for replaceable battery operated 

toy, then take the battery out from the toy. Dispose of 

battery in accordance with your local battery recycling or 

disposal laws.

WEEE: 

When this appliance is out of use, please 

remove all batteries and dispose of them 

separately. Bring electrical appliances to the local 

collecting points for waste electrical and electronic 

equipment. Other components can be disposed of 

in domestic refuse.

Summary of Contents for PATROL

















Reviews: