Page
7
of
14
Test Mode
Enter test mode to make adjustments to the programing, volume control, or test the
controls. All adjustments are made from the player 1 side of the machine. The player
where the start buttons are located is player 1.
1.
Turn off the Machine.
2.
Open the Coin door.
3.
Locate the White Test Button “See Fig Below“.
4.
Pull the Button and it will stay in the out position.
5.
Power up the machine.
6.
Once the machine is in test mode you will see a checkered board pattern
screen. “See Fig Below”.
7.
Once you are in this screen push the test button all the way in. once you
have done this the screen will change to the Clear High Scores Screen.
8.
Press Player 1 Start Button and the button next to the joystick to clear the
high scores.
