2
CAUTION:
Read and follow all instructions before Operating Fan.
Do not use fan if any part are damaged or missing.
WARNING:
To reduce the risk of fire or electrical shock, do not expose to water or rain.
To reduce the risk of fire or electrical shock, do not use this fan with any solid state speed control device.
RULES FOR SAFE OPERATION:
z
Never insert fingers or any other objects through the grille guard when fan is in operation.
z
Disconnect the fan when moving from one location to another.
z
Disconnect the fan when removing guards for cleaning.
z
Be sure fan is on a stable, flat surface when in operation.
z
DO NOT
use fan in windows. Rain and moisture may create electrical hazard.
CAUTION:
Do not alter the Fan’s assembly.
WARNING:
Be sure
FRONT
and
REAR
GUARD
screw are completely screwed down in locking position before operation.
INSTALLING AS STAND FAN
STAND ASSEMBLY:
1.
Attach OUTER TUBE to the BASE with 4 screws as shown.
2.
Loosen PLASTIC NUT on OUTER TUBE and
extend INNER TUBE to desired height.
3.
Slide COVER RING down the OUTER TUBE to rest on top of the BASE.
CAUTION:
The plastic nut must be fully tightened before
assembling the fan motor to the inner tube.
COLUMN/MOTOR ASSEMBLY INSTRUCTIONS:
Insert the fan at top of the INNER TUBE.
Then firmly tighten the screw at the hole of the fan holder.
INSTALLING AS FLOOR FAN
1.
Attach SHORTER POLE to the BASE with the 4 screws as shown.
2.
Insert the fan at the top of the SHORTER POLE.
3.
Then firmly tighten the screw at the hole of the fan holder.
HIGH VELOCITY FLOOR FAN OPERATING INSTRUCTIONS
