Operation Manual
34
XR5519
Operator Cab
Display Indicators
Fig 23. Display Indicators
N
E
A
B
C
D
G
L
O
H
F
K
J
When the transmission is in Neutral, the Transmission Shift In-
dicator highlights (N).
D. TRANSMISSION RANGE INDICATORS
The machine starts up with the transmission in High Range
mode, and the rabbit icon is displayed at B. Select the desired
mode by touching B to switch between Low Range depicted
by a turtle icon, and High Range (rabbit icon).
The Low Range mode is used for climbing steep grades, or
whenever slow speed is desired. The High Range mode adapts
to driving conditions and allows for higher speed travel.
E. WAIT TO START
The Wait to Start Indicator is displayed when the key switch is
moved to the RUN position. Wait until the indicator goes out
before starting the engine.
F. ENGINE SHUTDOWN
The Engine Shutdown Indicator will be displayed when there
is a serious engine fault and the engine should be shut down.
Automatic shut down is imminent.
I
M
Q
P
R
S
T
U
V
W
X
Y
The display allows the operator to view vital engine
information and other critical functions, including gauge
display, engine diagnostics to monitor engine condition and
performance, fault codes, and warning indicators.
A. PARKING BRAKE
The Parking Brake Indicator will be displayed when the
parking brake is applied.
B. STEERING SELECT INDICATOR
Displays the steering mode selected. The reach forklift in-
cludes three STANDARD modes of steering:
•
Two Wheel (2W)
•
Four Wheel (4W)
•
Crab Steering
C. TRANSMISSION SHIFT INDICATOR
The transmission has two forward (F) and two reverse (R)
modes. It also can operate in High Range or Low Range mode.
