Operation Manual
59
XR5519
Operation
Standard Carriage Operation
The standard carriage uses manually adjustable forks and can
be tilted up or down by using the thumb stick on the control
handle.
Fig 75. Attachment Tilt Control Switch.
(A) Attachment Tilt Down; (B) Attachment Tilt Up
Quick Attach System
This forklift includes a quick attach system that allows for easy
attachment changes. Perform attachment connection and
removal procedures on level ground.
A
B
Warning
Improper connection of an auxiliary
attachment can result in death or serious
injury. Attachments not locked into place
could become unstable and fall on the
operator or other personnel near the forklift,
which could result in death or serious injury.
•
Make sure attachment locking devices are always in
place.
•
DO NOT operate the forklift until you have positive
indication that the carriage attachment is fully engaged.
Attachment Connection
1.
Position the forklift directly behind the attachment.
NOTE:
Allow enough distance to extend the boom
approximately 18 to 20 inches (0.4 to 0.5 meters).
Fig 76. Drive Vehicle Forward to Align Pivot Pins (A) with Attachment
Hooks (B)
2.
Tilt the quick attach adapter forward.
3.
Extend the boom and/or drive the forklift forward until the
pivot pins (A) are below and between the two (2) attachment
hooks (B).
B
A
