Operation Manual
72
XR630
Warranty
Warranty
Xtreme Manufacturing Product Warranty Policy
Xtreme Warranty Statement
Effective: 1/1/2017
1) Xtreme Manufacturing warrants, its authorized sales and service centers (herein referred to as “SSC”), new
product(s) the mainframe and chassis weldments shall be free from defect in material and workmanship for
the period of 10 years or 10,000 hours whichever comes first. The boom weldment and boom rollers shall be
free from defects in material and workmanship for the period of 5 years or 5,000 hours whichever comes first.
The powertrain assemblies consisting of engine, transmission and drive axles and all other components not
listed above shall be free from defects in material and workmanship for the period of 2 year or 2,000 hours
after date of delivery. This warranty is made to the original owner of the new product(s) and is transferable for
the duration of the coverage period, to the subsequent owner with prior written approval from Xtreme
Manufacturing (see limitations).
2) Machines may be held in an authorized Distributor/ SSC’s stock for a maximum period of six (6) months
from the date of shipment from Xtreme, before the warranty period is automatically initiated on each
machine.
3) It is the responsibility of the Distributor/SSC to complete and return to Xtreme Manufacturing a Pre‐delivery
Inspection Record, Warranty Registration Form, before the act of rental / loan / demonstration of the machine
or delivery to an end user. In the case of direct sale to end customers the same responsibility lies with the end
customer.
4) Any end customer, SSC, distributor or dealer shall not be entitled to the benefits of this warranty and
Xtreme Manufacturing shall have no obligations here under unless the “Pre‐Delivery and Inspection Record”
has been properly completed and returned to the Xtreme Manufacturing Warranty department within fifteen
(15) days after delivery of the Xtreme Manufacturing product to the Customer or Dealer’s demonstration /
rental fleet. Xtreme Manufacturing must be notified, in writing, within ten (10) days, of any machine sold to a
Customer from a Dealer/SSC’s rental fleet during the warranty period.
5) Any part or parts which upon examination by the Xtreme Product Support Department are found to be
defective within the specified warranty period, will be replaced or repaired at the sole discretion of Xtreme
Manufacturing, through its local Authorized Distributor/SSC, at no charge. Any parts replaced under warranty
must be original Xtreme parts obtained through an authorized Xtreme Manufacturing Distributor/SSC unless
expressly agreed otherwise in writing and in advance by Xtreme Manufacturing’s warranty department.
