Walk-behind floor scrubber -www.xtremepolishingsystems.com
l
AC machines: Please unplug the AC power plug. Battery machines: Please remove the
battery connector plug from the body socket.
l
Empty and clean the recovery tank.
6.8.
Some useful tips to get the most from your scrubber drier
In the event of particularly stubborn dirt on the floor, washing and drying can be performed in two
separate operations.
6-9 Pre-wash
l
Turn on water drain valve.
l
Step footboard to low brush plate.
l
Lightly touch the brush motor button to start bush motor.
l
Ensure that the suction motor not work and the squeegee is on the lift position.
l
Start cleaning.
Water flow rate must be proportional with the forward speed. slower speed,water needed less.
In some particularly dirty place , you can stay the machine properly there in order to have more
time to separate dirt for cleaner to get better cleaning effect.
6.9.1 Drying
Lower the squeegee and with the suction motor on, pass over the same area
washed previously.The result is equivalent to in-depth washing and subsequent ordinary
maintenance will take less time.
To wash and dry at the same time, operate the brush, water, squeegee and suction motor
simultaneously.
6.9.2 Draining the dirty water
!
DANGER
Use suitable personal protection devices.Drain the dirty water with the machine
disconnected from the power supply.
The dirty water drum drain hose is at the back left side of the machine. To
empty the drum:
Push scrubber to gutter, please do as below process ;
Fold the sewage pipe, as picture (22) show;
Open lid of wastewater pipe, slowly release sewage pipes, as picture in (23), picture (24)
shown;