Xtreme Power Conversion 20kVA Model User And Installation Manual Download

Page: 2 / 48

Xtreme Power Conversion Corporation

R91 User’s Manual

Page 2

Uninterruptible Power Supply

Table of Contents

Introduction.................................................................................................7
Product Description......................................................................................7

Main Features..................................................................................................................................7

System Configuration...................................................................................8

Unpacking the UPS..........................................................................................................................8

Installation Notes.............................................................................................................................9

External Protective Devices.............................................................................................................9

Power Cables.................................................................................................................................10

Power Cables Connection..............................................................................................................10

UPS Multi-Module Installation......................................................................................................12

CYCLON Battery Pack Connection...............................................................15
BP-XR4U480A Battery Pack Connection......................................................16

Assembly........................................................................................................................................17

4 Post Rail Mounting.....................................................................................................................20

Multiple Battery Pack Connections................................................................................................20

Installation and Setup....................................................................................................................21

BP-XR2U480A Battery Pack Connection......................................................22

Assembly........................................................................................................................................23

4 Post Rail Mounting......................................................................................................................26

Multiple Battery Pack Connections...............................................................................................26

Installation and Setup....................................................................................................................27

Operation...................................................................................................28

Operation Modes...........................................................................................................................28

Turn On / Off the UPS....................................................................................................................29

Communication Port Definitions (RS232, RS485)..........................................................................35

LCD Display....................................................................................................................................36

Options..........................................................................................................................................44

Troubleshooting.........................................................................................45

Summary of Contents for 20kVA Model
















































Search results

Summary of Contents for 20kVA Model

Reviews:

Related manuals for 20kVA Model

Brands by name

Popular brands

Xtreme Power Conversion 20kVA Model, User And Installation Manual

Search results

Summary of Contents for 20kVA Model

Reviews:

Related manuals for 20kVA Model

Brands by name

Popular brands