Xtreme Power Conversion Corporation
T90 User’s Manual
Page 5
Uninterruptible Power Supply
EMC Statements - FCC Part 15
Notice:
Pursuant to section 15 of the FCC rules, this product has been tested and thereby complies to the condi
-
tions of a Class B (700-1500VA) and Class A (2000-3000VA) digital device, which have been established for offering
sufficient protection against dangerous interference for installation in a residential area. Installation and use of the
equipment should comply with the instructions provided in order to avoid such interference due to the amount
of radio frequency energy that is radiated and generated by the equipment. In spite of this, we cannot assure that
a certain amount of interference may not occur in some installations. If, by turning on and off, it can be deduced
that your radio or television reception is found to be influenced by harmful interference from the equipment, it is
recommended to use one of the following preventive measures:
• Place the receiving antenna in a separate location or orientation.
• Ensure a greater distance is achieved between the receiver and the equipment.
• Ensure that your equipment is connected to an outlet on a separate circuit than the receiver.
• Contact a technician experienced with radio and TV or a dealer for further assistance.
ICES-003
This Class B Interference Causing Equipment meets all requirements of the Canadian Interference Causing Equip
-
ment Regulations ICES-003. Cet appareil numerique de la classe B respecte toutes les exigencies du Reglement sur
le materiel brouilleur du Canada.
Declaration of Conformity Request
Units labeled with a CE mark comply with the following standards and directives:
• Harmonic Standards: EN 50091-1-1, EN 62040-1-1 1st / IEC 62040-1-1 1st and EN 50091-2 / EN62040-2
1st / IEC 62040-2 1st.
• EU Directives:73/23/EEC, Council Directive on equipment designed for use within certain voltage limits:
2006/95/EC, Amending Directive 93/68/EEC and 73/23/EEC
89/336/EEC, Council Directive relating to electromagnetic compatibility
2004/108/EC, Amending Directive 92/31/EEC and 89/336/EEC relating to EMC
The EC Declaration of Conformity is available upon request for products with a CE mark.
IMPORTANT SAFETY INSTRUCTIONS: (SAVE THESE INSTRUCTIONS)
• This Manual Contains Important Instructions that should be Followed during Installation and Maintenance
of the UPS and Batteries.
• The equipment can be operated by any individuals with no previous experience.
• WARNING:
Intend for installation in a controlled environment. Maximum ambient temperature 40°C.
• CAUTION:
Risk of electric shock. Refer to top or rear or bottom of UPS for cautionary markings.
• CAUTION:
Risk of electric shock. Heat sinks are live. Disconnect unit before servicing.
• CAUTION (UPS Having Internal Batteries):
Risk of electric shock - Hazardous live parts inside this unit are
energized from the battery supply even when the input AC power is disconnected.
