Xtreme Power Conversion Corporation
M90S-4S User’s Manual
Page 42
Uninterruptible Power Supply
Use “ ” or “
” button to choose System and UPS module option (MASTER#00 or SLAVE#01). Then, press “
” button to go into the submenu, as shown in Figure 5-11.
Figure 5-11 Measurement source selection Screen
Use “ ” or “
” button to choose Input, Output, Bypass, Load, and Battery option, and press “
” button to
go into submenu. The measurement can be read as listed in Table 4-1.
Table 4-1: Measurement data
Menu
Item
Explanation
Input
L-N Voltage (V)
Input phase voltage (L1, L2). Units 0.1V.
Frequency (Hz)
Input Frequency (L1, L2). Units 0.1Hz.
Outpu
L-N Voltage (V)
Output phase voltage (L1, L2). Units 0.1V.
L-N Current (A)
Output phase current (L1, L2). Units 0.1A.
Frequency (Hz)
Output Frequency (L1, L2). Units 0.1Hz.
Power Factor
Output Power Factor (L1, L2).
Bypass
L-N Voltage (V)
Bypass phase voltage (L1, L2). Units 0.1V.
Frequency (Hz)
Bypass Frequency (L1, L2). Units 0.1Hz.
Power Factor
Bypass Power Factor (L1, L2).
Load
Sout (KVA)
Apparent power (L1, L2). Units 0.01KVA.
Pout (KW)
Active power (L1, L2). Units 0.01KW.
Load Level (%)
The percentage of the UPS rating load (L1, L2). Units
1%.
