NXRi-6KL, NXRi-10KL USER MANUAL
UNINTERRUPTIBLE POWER SUPPLY (UPS)
Xtreme Power Conversion® (XPC) Corporation (Rev 2/7/13)
Page 9
STANDARDS
Safety
IEC/EN 62040-1-1
EMI
Conducted Emissions IEC/EN 62040-2
Category C3
Radiated Emissions
IEC/EN 62040-2
Category C3
EMS
ESD
IEC/EN 61000-4-2
Level 4
RS
IEC/EN 61000-4-3
Level 3
EFT
IEC/EN 61000-4-4
Level 4
SURGE
IEC/EN 61000-4-5
Level 4
CS
IEC/EN 61000-4-6
Level 3
Power-frequency
Magnetic field
IEC/EN 61000-4-8
Level 3
Low frequency
Signals
IEC/EN 61000-2-2
Warning:
This is a product for commercial and industrial applications. Installation in the
appropriate environment is required.
INTRODUCTION
The information provided in this manual covers single phase 6000 and 10000 VA uninterruptible power
systems, their basic functions, operating procedures, options available and emergency situations. It also
includes information on how to ship, store, handle, and install the equipment. Only detailed
requirements of the UPS units are described herein, and installation must be carried out in accordance
with this manual. Electrical installation must also carefully follow local legislation and regulations. Only
qualified personnel should conduct these installations as failure to acknowledge electrical hazards could
prove to be fatal.
PRODUCT DESCRIPTION
Many different kinds of sensitive electrical equipment can be protected by an Uninterruptible Power
Supply (UPS) including computers, workstations, process control systems, telecommunications systems,
sales terminals, other critical instrumentation, etc. The purpose of the UPS is to protect these systems
from poor quality utility power, complete loss of power, or other associated problems.
Electrical interference exists in many forms, causing problems in AC power, from lightning, power
company accidents and radio transmission motors, air conditioners, and vending machines. Protection
