XPRT-6kVA, XPRT-10kVA USER’S MANUAL
UNINTERRUPTIBLE POWER SUPPLY (UPS)
Xtreme Power Conversion® (XPC) Corporation
Page 45
OPERATION
Normal Operation Conditions
1.
The UTILITY INPUT is present and within the tolerance as show in Specification section of this
manual.
2.
The UPS is turned ON.
3.
The LOAD does not exceed the capacity of the UPS.
4.
The OPERATING TEMPERATURE is below alarm level.
Switching the UPS OFF
1.
Make sure that the load has been shut down in an orderly manner.
2.
Press the keypad
(FIG 50) for 1 second to switch the UPS to BYPASS.
FIG 50 – TO TURN THE UPS OFF
3.
Press the keypad
(FIG 50) for a second time for 1 second to switch the UPS OFF.
If electrical isolation is required (e.g. for maintenance purposes) proceed with the following steps
4.
Turn the OUPUT CIRCUIT BREAKER to OFF position (FIG 51 or FIG 52).
FIG 51 – 6KVA OUTPUT BREAKER