XPRT-6kVA, XPRT-10kVA USER’S MANUAL
UNINTERRUPTIBLE POWER SUPPLY (UPS)
Xtreme Power Conversion® (XPC) Corporation (Rev 2/7/13)
Page 53
Switching the UPS OFF
1.
Make sure that the load has been shut down in an orderly manner.
2.
Turn the OUTPUT CIRCUIT BREAKER to OFF position (FIG 65).
3.
Press the keypad
(FIG 64) for 1 second to switch the UPS to BYPASS.
FIG 64 – TO TURN THE UPS OFF
Press the keypad
(FIG 64) for a second time for 1 second to switch the UPS OFF.
4.
Turn the INPUT CIRCUIT BREAKER to OFF position (FIG 65).
If electrical isolation is required (e.g. for maintenance purposes) proceed with the following steps
FIG 65 – 10KVA OUTPUT BREAKER
5.
Turn the INPUT CIRCUIT BREAKER to OFF position (FIG 66).
FIG 66 – 10KVA INPUT BREAKER
