![background image](http://html1.mh-extra.com/html/xtreme-power-systems/x24/x24_installation-and-usage-manual_891042044.webp)
System Menu
-
Warnings
Figure 26 – Warnings menu
The Warnings menu has the option to change the voltage level trigger and
set the LED Level (brightness) for the status conditions.
Min Voltage – the minimum voltage that causes the LED to change colors.
Ext LED Flash – whether a warning causes the external LED to flash.
The LED is normally green when the voltage is above the Min Voltage
threshold. When the input voltage drops below this voltage, the LED will
change to yellow. If the input voltage drops below 3.5v the LED will change
to purple. The LED will remain this color (when not in a menu system) until
the voltage is reset in the Voltage Info screen (see Page 3, Voltage
Information).
By default, the external LED output will flash when there is a situation that
results in a warning. The warning flashing takes priority over the BEC status.
A warning is generated for any of the following reasons:
Min Voltage threshold reached
Voltage dropped below 3.5v
Failsafe condition occurred
44