MAINTENANCE
6
CAUTION: ALWAYS
be sure that the tool is switched off and unplugged before attempting to perform
inspection or maintenance.
NEVER
use gasoline, benzine, thinner, alcohol or the like. Discoloration,
deformation or cracks may result.
INSTALLING OR REMOVING THE WHEEL
If the cutting action of the diamond wheel begins to diminish, use an old discarded coarse grit bench grinder
wheel or concrete block to dress the diamond wheel. To do this, tightly secure the bench grinder wheel or
concrete block and cut in it.
REPLACING CARBON BRUSHES
Use a screwdriver to remove the brush holder caps. Take out the
worn carbon brushes, insert the new ones and secure the brush
holder caps. To maintain product SAFETY and RELIABILITY,
repairs, any other maintenance or adjustment should be
performed by Factory Service Centers, always using FACTORY
replacement parts.
SAVE THESE INSTRUCTIONS.