background image

3

CARBON MONOXIDE PRECAUTIONS
This Auger Drill is designed for outdoor use only. DO NOT

 operate this drill in indoor, closed or poorly 

ventilated areas. When running, the engine of this product produces carbon monoxide, a colorless and 

odorless toxic gas that, when inhaled, can cause serious personal injury or death. 

FIRE AND EXPLOSION PRECAUTIONS

Gasoline fuel and fumes are flammable and potentially explosive. 

Use proper fuel storage and handling 

procedures. Have multiple ABC class fire extinguishers nearby when using this power tool. Keep the Auger 

Drill and surrounding areas clean and dust free at all times. 

1.

 If oil or fuel spills occur, they must be cleaned up immediately. Dispose of fluids and cleaning materials as 

per any local state or federal codes and regulations. Store oil rags in a covered metal container. 

2.

 

DO NOT

 store fuel or other flammables near the Auger Drill.

3.

 

DO NOT

 smoke or allow sparks, flames or other sources of ignition around the Auger Drill. 

4.

 Keep grounded conductive objects such as tools away from exposed, live electrical parts and connections 

to avoid sparking or arcing. Failure to do so could ignite fumes or vapors.

5.

 

DO NOT

 refill the fuel tank while the engine is running or while the engine is still hot. 

DO NOT

 operate the 

Auger Drill with any known leaks on the fuel system. 

6.

 Use only manufacturer recommended fuel and oil. 

7.

 Prior to performing service, maintenance or cleaning procedures, allow the engine to completely cool. 

Then, remove the spark plug from the engine. 

8. DO NOT

 alter or adjust any part of the Auger Drill or engine that is assembled and supplied by the 

manufacturer. 

9.

 Follow scheduled Auger drill engine maintenance. 

CHEMICAL PRECAUTIONS

1. 

Avoid contact with hot fuel, oil and exhaust fumes. 

2. 

Avoid body contact with fuels, oils and lubricants used in the Auger Drill and engine. If swallowed, seek 

medical attention immediately. DO NOT induce vomiting if fuel is swallowed. For skin contact, immediately 

wash with soap and water. If fuel gets in the eyes, immediately flush eyes with clean water. 

WARNING: This product contains or, when used, produces a chemical known to the state of California 

to cause cancer and birth defects or other reproductive harm. (California Health and Safety Codes 

25249.5, et seq.)

NOTE: This item does not meet California CARB requirements and is not for sale or use in California. 

IMPORTANT SAFETY INFORMATION

Summary of Contents for 81094













Reviews: