ASSEMBLY
6
Step 1 - Attach Wheels to Base
1.
Line up the holes in the wheel bracket with corresponding holes in the base. Insert two
M6 bolts
through
holes and then finger tighten two
M6 nuts.
2.
Be sure that the wheel assembly is parrallel to the base and fully tighten bolts.
Step 2 - Attach Ground Fixtures to Base
1.
Optional ground fixtures (not included with all models)
2.
Mount fixtures with six pieces
M6 small bolts and M6 nuts
into the holes on the base housing.
Step 3 - Attach Post Bracket to Base
1.
Attach the
Post Brackets
to
Base
with three pieces of
M8 bolts
, use wrench to fasten.
Summary of Contents for 96050
Page 5: ...4 PARTS DIAGRAM ...
Page 14: ...TROUBLESHOOTING 13 ...
