NXRTi USER’S MANUAL
UNINTERRUPTIBLE POWER SUPPLY (UPS)
Xtreme Power Conversion Corporation (Rev 8/29/13)
Page 25
•
Confirm the ECO setting function. After selecting ON or OFF, press and hold the function setting
button
for more than 2 seconds. The ECO setting function is now completed and the
“ON” or “OFF” below the “ECO” will light without flash.
•
Exit from the setting interface. Press and hold function setting button
for more than
2 seconds, exit from the setting interface and return to the main interface.
•
Bypass Output Setting
•
Enter the setting interface. Press and hold the function setting button
for more than
2 seconds. Press and hold the function setting button
for more than ½ second but
less than 2 seconds, select the function setting, choose the bypass output interface, at that
moment the letters “bPS” will flash as following:
