Xtreme Power Conversion Corporation
S80i User’s Manual
Page 3
Uninterruptible Power Supply
Rear View
1.
Output Receptacles
2.
AC Input
3.
Circuit Breaker
4.
Modem/Phone/Network Surge Protection
5.
RS-232 Communication Port
6.
USB Communication Port
Installation and Initial Startup
NOTE:
Before installation, please inspect the unit. Be sure that nothing inside the package is damaged.
Placement & Storage Conditions
Install the UPS in a protected area that is free of excessive dust and has adequate air flow. Please place the UPS
away from other units at least 20 cm to avoid interference. Do NOT operate the UPS where the temperature and
humidity is outside the specific limits. (Please check the specs for the limitations).
Connect to Utility and Charging
Plug in the AC input cord to the wall outlet. For the best results, suggest to charge the battery at least 6 hours
before initial use. The unit charges its battery while connecting to the utility.
