Xtreme Power Conversion Corporation
M90 User’s Manual
Page 7
Uninterruptible Power Supply
3. Put a ramp in the front of the cabinet and insert small wood into groove. Then, remove two side panels. Refer
to Figure 2-3.
Figure 2-3
4.
Remove 4 fixing cabinet plates and loosen leveling feet by rotating them counterclockwise. Then, move the
cabinet from the pallet. Refer to Figure 2-4.
5.
To fix the cabinet in position, simply rotate leveling feet clockwise. Refer to Figure 2-5.
Figure 2-4 Figure 2-5
