Xtreme Power Conversion Corporation
Web/SNMP Cards
Page 17
UPS Management
UPS Web Management by NetAgent
Introduction
After finishing NetAgent installation, including hardware installation and IP setting, you are now able to monitor
and control the UPS by inputting NetAgent IP address in Browser.
• Starting the Web Brower (Netscape or Internet Explore)
• Enter the NetAgent IP Address (Which is setting on Netility, e.g. 192.168.0.156).
Input NetAgent UPS IP address
• On the first screen, enter the current password. If no password has been set, just press [ENTER].
NetAgent UPS Login dialog
NetAgent UPS Web Interface
Enter NetAgent UPS Web page, there are 4 main selections in the first Web page:
• Information
• Configuration
• Log Information
• Help
Enter the selection item, the sub-menu items will be shown on the left side of the page.
When using this NetA-
gent for the first time, please enter the [Configuration] menu item to set all the configuration items. Then the
UPS status will be accurately shown on other pages.
