Xtreme Power Conversion Corporation
Web/SNMP Cards
Page 14
UPS Management
Netility Configure
When using DHCP or BOOTTP to set up IP address, then the IP address, Subnet Mask and Gateway would receive
their address directly from the network system.
Advanced: Advanced NetAgent UPS Setting
In order to ensure the secure management of the UPS, Netility provides two security functions:
Management Protocol
Netagent UPS provides HTTP/HTTPS (WEB) and Telnet to reference any related parameter setting for the man-
ager. Concerning security, the manager could build use openly or any advance port setting methods. Followings
are the description:
1. At advanced setting, two functions were set as activated by using port number 80 and 23 for Http and
Telnet. As for Https and SSH are 443 and 22.
2. Unselect means not using the function.
3. When set to the other port value, full IP Address must be entered in order to login to the website or
Telnet.
For example,
• Set 81 as HTTP port number, then http://192.168.0.177:81 must be typed at the web address to proceed
to Netagent UPS’s web page.
• Set 23 as Telnet port number, then “192.168.0.177:24” must be typed at Telnet to proceed to the Telnet
screen of NetAgent UPS.
