Xtreme Power Conversion Corporation
V80 User’s Manual
Page 8
Uninterruptible Power Supply
Fault Codes
Fault
Fault code E09
Output Short :
Output circuit short.
1. Shut down the UPS
2. Your attached equipment may have
problems, please remove them and check
again.
Fault code E14
Overload:
Your equipment requires more power than
the UPS can provide.
It will shutdown.
Shut off non-essential equipment. If this
solves the overload problem, the UPS will
transfer to normal operation.
Fault code E18
Fan fail :
Fan has been damaged.
1.Shut down the UPS
2.Replace the fan
Fault code E19
Over Temperature
1. Shut down the UPS. Restart the UPS
to Check the fan for operation and if the
ventilation hole has been covered
2. Contact technical support for repair.
