Page 42
Xtreme Manufacturing, LLC
Operator Cab
XR1045
Boom Control
The boom control handle has variable motions from the
center position that control boom and tilt functions
Figure 6-34. Boom Control Handle.
The boom control handle is used to raise, lower, extend,
retract the boom, and tilt the carriage (or attachment)
NOTE:
The boom control handle is a variable speed
control Function speed is proportional to handle
movement The more the handle is moved in the
appropriate direction, the faster the corresponding
function will occur
NOTE:
Increasing engine speed can increase boom lift
and extend speed
NOTE:
Two (2) boom functions can be performed at the
same time by moving the handle into the corner between
two (2) functions For example, moving the handle to the
forward, left corner will lower and retract the boom at the
same time
Figure 6-35. Boom Control Handle Functions.
