Page 60
Xtreme Manufacturing, LLC
Operation
XR1255
Fork Positioning Carriage Operation
Caution
Do not adjust forks when Fork Positioning Carriage is
loaded. Adjusting forks when carriage is loaded may
result in loss of load or carriage damage. Always use
the Fork Positioning control handle to adjust the forks
BEFORE loading the carriage.
To move the forks outward, press the top button on the
front control handle, or move the auxiliary handle to the
left To move the forks inward, press the lower button on
the front control handle, or move the auxiliary handle to
the right
Figure 7-20. Fork Positioning Control Handle.
Warning
Hydraulic attachments have a
maximum hydraulic pressure
rating. Failure to make sure
the attachment is equipped
with a pressure reducing valve, or is rated to be equal
or greater than 4,300 psi (296.5 bar), which is the
maximum pressure of the forklift auxiliary hydraulic
system at the quick-disconnect couplers, could result
in death or serious injury.
When the auxiliary attachment control lever is moved
right or left it activates hydraulic pressure through the
quick attach couplers to move the carriage
Figure 7-21. Quick Attach Couplers For Hydraulic Systems.
(A) Female Coupler. (B) Male Coupler.
Quick Attach System
This forklift includes a quick attach system that allows
for easy attachment changes Perform attachment
connection and removal procedures on level ground
Attachment Connection
Warning
Improper connection of an auxiliary
attachment can result in death or serious
injury. Attachments not locked into place
could become unstable and fall on the
operator or other personnel near the forklift, which
could result in death or serious injury.
• Make sure attachment locking devices are always in
place.
• DO NOT operate the forklift until you have positive
indication that the quick attach pin and lock lever
are fully engaged.
1.
Position the forklift directly behind the attachment
NOTE:
Allow enough distance to extend the boom
approximately 18 to 20 inches (0 46 to 0 5 meters)
Summary of Contents for XR1255
