Xtreme XR1255 Operation And Safety Manual Download

Page: 40 / 82

Operation Manual

Operator Cab

Depending on the OEM configuration, the digital display may

allow you to select the language, the units, to adjust the back-

light and the contrast. Also, the display may be configured to

store engine fault codes and to view the engine configuration.
There are two 4-up display screens available that can be con-

figured by the user. Each option can place parameter data into

one of four areas on the screen known as quadrants. Factory

defaults for the first 4-up display include coolant temperature,

engine speed, oil pressure, and battery voltage. Factory de-

faults for the second 4-up display include DEF (diesel exhaust

fluid) Level, DPF (diesel particulate filter) active regen status,

exhaust filter inlet temperature, and exhaust filter outlet tem-

perature.
You can customize each 4-up display with the parameter you

define for each quadrant.
1. Touch Menu and use the Arrow Keys to highlight SETUP

4-UP DISPLAY, and touch Enter.

2. To select USE DEFAULTS, highlight the option and press

Enter. A message indicating “RESTORED TO DEFAULTS” is

displayed.

3. To select CUSTOM SETUP, highlight the option and press

Enter. The 4-up display appears.

4. Use the Arrow Keys to switch between the two 4-up dis-

plays.

5. To edit a 4-up display, touch Enter while that 4-up dis-

plays on screen.

6. Use the Arrow Keys to select which quadrant to edit.

7. Once you select a quadrant, press Enter and you move to

a list of parameters.

8. The parameter highlighted is the selected parameter for

the screen. The number to the right of the parameter indi-

cates in which quadrant it displays.

9. Use the Arrow Keys to highlight the new parameter to be

placed in the selected quadrant. Touch Enter.

10. Press Menu to return to the SETUP 4-UP CUSTOM SETUP

screen.

11. The parameter in the selected quadrant has changed to

the parameter selected in the previous screen.

12. Repeat the parameter selection process until you fill all

quadrants.

= upper left

quadrant

= upper right

quadrant

= lower left

quadrant

= lower right

quadrant

Display Setup: 1-UP Display

1. Similar to the 4-UP display configuration, you can select

“1-UP Display” by pressing the Menu button and then

navigating to “Go To 1-UP Display”.

2. Pressing Enter will return to main screen.

To setup 1-UP Display:

1.  Press the Menu button
2.  Navigate to “Setup 1-UP Display” and press Enter
3.  Use Arrow Keys (<) and (>) to scroll through options
4.  Select “Use Defaults” and press Enter to restore to defaults
5.  Select “Custom Setup” and press Enter to customize
6.  Select “Automatic Scan” and press enter to turn “On” or

“Off”

7. Press Menu button twice to return to Main screen

Display Setup : 4-UP Display

Units Selection

From SELECT UNITS, you may select how information is dis-

played: ENGLISH for Imperial units (PSI, °F), METRIC KPA , and

METRIC BAR for IS units (kPa, Bar, °C)
1.  Press menu button
2.  Navigate to “Select Units” and press ENTER
3.  Use the Arrow Keys (<) & (>) to scroll through options
4.  Press ENTER when preferred option is selected
5.  Press MENU button twice to return to the Main screen

Language Selection

1.  Press menu button
2.  Navigate to “Languages” and press enter
3.  Use – (<) & + (>) to scroll through languages
4.  Press enter when desired language is highlighted
5.  Press menu button twice to return to main screen