background image

 
 
 
 
 

 
 
 
 
 

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

 
TABLE OF CONTENTS 

 

IMPORTANT SAFETY INSTRUCTIONS………………………………………………………..2-3 

HEIGHT & CLEARANCE REQUIREMENT………………………………………………..……4 

3 VENTING 

REQUIREMENT……………………………………………………………….…….…4 

4 VENTING 

METHODS………………………………………………………………………………4 

5 ELECTRICAL 

REQUIREMENT……………………………………………………………….….5 

6 TOOL 

NEEDED……………………………………………………………………………………..5 

7 PART 

SUPPLIED………………………………………………………………………….……….5 

RANGE HOOD DIMENSIONS………………………………………………………………...….6 

9 INSTALLATION………………………………………………………………………………..…..6-9 

10 

RANGE HOOD OPERATION……………………………………………………………..…...…9-10 

11 SPECIFICATION………………………………………………………………….…….………….10 

12 

REPLACING THE LIGHT BULB……………………………………………….………………...11 

13 TROUBLE 

SHOOTING………………………………………………………………….…....……11 

14 

USE & CARE………………………………………………………………….………….……...…12 

15 WARRANTY…………………………………………………………………….…………………..13 

 

 
 
 
 
 
 
 

 

IMPORTANT SAFETY INSTRUCTIONS 

 

I

MPORTANT 

N

OTICE

:

 The Important Safety Instructions and warnings in this manual are not meant to cover all 

possible problems and situations that can occur.    Please also use common sense and caution when installing, 
maintaining or operating this or any other appliance.    Please always contact the XtremeAir USA, LLC. Customer 
Support Team at 1-714-554-9000 or email: 

support@XtremeAirUsa.com

    with any problems or situations that you 

do not understand.

 

            The manufacturer disclaims all liability for any damage or injury caused as a result of not following 
instructions for installation contained in the following text. 

 
 
 
 

 

 

DANGER 

To avoid the possibility of explosion or fire, do not store or use combustible, flammable or explosive vapors and 
liquids (such as gasoline) inside or in the vicinity of this or any other appliance. Keep items that could explode (such 
as aerosol cans) away from cook top burners, ovens and range hoods. Do not store flammable or explosive 
materials in adjacent cabinets or surrounding areas.

 

 
Disclaimer:
 The manufacturer and/or distributor/reseller decline all responsibility in the event of failure to observe 
the instructions provided for installation, maintenance and suitable use of the product. The manufacturer and/or 
distributor/reseller shall NOT be responsible for any injury due to negligence and the warranty of the unit shall 
automatically be voided due to failure to observe proper safety and installation procedures.    The manufacturer 
and/or distributor/reseller will not be held responsible for any damages to personal property or real estate or any 
bodily injuries whether caused directly or indirectly by the range hood. 
 
 

                                                 

www.XtremeAirUsa.com

                                                                    PAGE 

2

 

Summary of Contents for PRO-X PX01-I36













Reviews: