background image

www.XtremeAirUsa.com

                                                                    PAGE 

12

 

 

 
B. Adjusting blower speed: 

           * Touch and hold down (+) for increase 
           * Touch and hold down (-) for decrease 

 
C. Turning off the blower: 

           *Touch and hold down power sign (1) for 1-2 seconds   

 

 

D. To turn the light ON/OFF: 

* Touch Light button once to turn on the lights, and once again to turn off the lights. 
 

E. Adjusting the timer function:   

1.

 

While the blower (motor) is not running, touch and hold Decrease Value button over 3 seconds to 
enter timer mode.   

2.

 

Adjust to desired period of delay off timer by touching Increase Value or Decrease Value 

button 

(minimum 1 minute to maximum 15 minutes). This setting will be saved immediately.   

 

F. Activating the timer function:   

* While the blower (motor) is running, touch and hold Power button for over 3 seconds to activate delay     
    off timer. Power-off delay indicator will light up and power-off delay digital timer will begin to   
    countdown, when it reaches zero, the blower (motor) will shut down. 
 

G. To clear cleaning reminder: 

 

When blower (motor) starts to rotate, cumulative running time will be shown in 

Power-On Elapsed 

Digital Timer

. This timer icon flashes when 30 hours is up and reminds user to clean the baffle filters.   

 

After cleaning the filters and when the motor is not in use, touch and hold (+) 

Increase Value 

button 

over 3 seconds to reset the timer. Please note that turning off the system will not reset the 

Power-On 

Elapsed Digital Timer

.  

 

F. AUTOMATIC SHUT OFF: 

 

MACHINE WILL AUTOMATICLY SHUT OFF AFTER OF APP. 2 ½ HOURS (FOR THOSE 
MANUFACTURED AFTER AUGUST 2012 ONLY) 

 
 

 SPECIFICATION: 

Body Design   

Seamless Stainless Steel, Satin Finish   

Power Rating   

120V/60Hz (USA & Canada standard) 

General Input Power   

154W (150W + 2x2W) 

Motor Input Power   

150 W each 

Ampere  

3.0A 

Levels Of Speed Control 

4 Levels 

Airflow 

(Q/L/M/H) 280CFM / 460CFM / 670CFM / 900CFM 

Noise Level 

(Q/L/M/H) 1.2Sone(43dB) / 2.8Sone(55dB) / 5.0Sone(63dB) / 6.5 Sone(67dB) 

Number Of Motors   

One Motor 

Motor Type   

Single Chamber Ultra Quiet 

Fan Type   

Centrifugal Squirrel Cage 

Filtration Type   

Heavy Duty Stainless Steel Baffle Filter 

Illumination   

LED light, 2W Maximum 

Venting Size   

  Top, 6 inches Round 

Interference Protection   

Radio Frequency Interference Protected 

Note 

Specification subject to change without notice. 

 
 
 

11 

Summary of Contents for PX01-W30















Reviews: