background image

                                                 

www.XtremeAirUsa.com

 

                                                                  PAGE 

2

 

 
 
 
 

 
 
 
 
 

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

 

I

MPORTANT 

N

OTICE

:

 The Important Safety Instructions and warnings in this manual are not meant to cover all 

possible problems and situations that might occur.    Please also use common sense and caution when installing, 
maintaining or operating this or any other appliances.    Please always contact the XtremeAir USA, LLC. Customer 
Support Team at 1-714-554-9000 or email: 

support@XtremeAirUsa.com

    with any problems or situations that you 

do not understand or confuse.

 

            The manufacturer disclaims all liability for any damage or injury caused as a result of not following 
instructions for installation contained in the following text. 

 
 
 
 

 
To avoid the possibility of explosion or fire, do not store or use combustible, flammable or explosive vapors and 
liquids (such as gasoline) inside or in the vicinity of this or any other appliance. Keep items that could explode 
(such as aerosol cans) away from cook top burners, ovens and range hoods. Do not store flammable or explosive 
materials in adjacent cabinets or surrounding areas.

 

 
Disclaimer:
 The manufacturer and/or distributor/reseller decline all responsibility in the event of failure to ob-
serve the instructions provided for installation, maintenance and suitable use of the product. The manufacturer 
and/or distributor/reseller shall NOT be responsible for any injury due to negligence and the warranty of the unit 
shall automatically be voided due to failure to observe proper safety and installation procedures.    The 
manufacturer and/or distributor/reseller will not be held responsible for any damages to personal property or real 
estate or any bodily injuries whether caused directly or indirectly by the range hood. 
 

 

TABLE OF CONTENTS 

 

1

 

IMPORTANT SAFETY INSTRUCTIONS………………………………………………………..2-3 

2

 

HEIGHT & CLEARANCE REQUIREMENT………………………………………………..……4 

3

 

VENTING REQUIREMENT……………………………………………………………….…….…4 

4

 

VENTING METHODS………………………………………………………………………………4 

5

 

ELECTRICAL REQUIREMENT……………………………………………………………….….5 

6

 

TOOL YOU WILL NEED.………………………………………..……………………….………..5 

7

 

PART SUPPLIED…………………………………………………………………..……….……….5 

8

 

RANGE HOOD DIMENSIONS & INSTALLATION OVERVIEW…………………………..….6 

9

 

INSTALLATION………………………………………………………………………………..…..7-9 

10

 

RANGE HOOD OPERATION……………………………………………………………..…...…10-12 

11

 

SPECIFICATION………………………………………………………………….…….………….12 

12

 

TROUBLE SHOOTING………………………………………………………………….…....……13 

13

 

REPLACING THE LIGHT BULB……………………………………………….………………...13 

14

 

USE & CARE………………………………………………………………….…………..……...…14 

 

 

DANGER 

 

IMPORTANT SAFETY INSTRUCTIONS 

01 

Summary of Contents for PX01-W30















Reviews: