6
STEP #6: INSTALLING OIL TUNNEL & BAFFLE FILTERS
1
IMPORTANT: BEFORE YOU BEGIN
1. This unit is equipped with TOUCH SENSITIVE CONTROLS so please DO NOT PRESS. A light touch and hold on the required button for a matter of a (1) one
second is all that is needed.
2. TOUCH THE ENTIRE BUTTON. See the following illustration:
Importance Notice:
1. 2 ½ HOUR AUTOMATIC SHUT OFF: this range hood will be shut off for every approx. 2 ½ hour. You can re-start
operation as usual after it was shut off.
2. 30 HOUR REMINDER: after 30 hours of use, the timer (8) will be flashing. To clear it, please refer to “G-To Clear
Cleaning Reminder” on page 7.
TYPE 2: TOUCH BUTTON
1.
(1) To power ON/OFF, and to activate power-off delay timer.
2.
(2) To decrease blower (motor) speed, decrease timer value, and enter timer mode.
3.
(7) To increase blower (motor) speed, increase timer value, and cumulative timer reset.
4.
(3) Blower (motor) is running light indicator.
5.
(4) Shows current blower (motor) speed (1-4).
6.
(5) Lights up when lights turned on.
7.
(6) To turns ON/OFF lights.
8.
(8) Indicates the accumulated time the system is running.
9.
(9) Indicates the length of time left for delay off function.
10.
(10) Lights up when auto-shutdown delay timer function is on.
VS.
For best results, Start the range hood
before cooking and allow it to operate
several minutes after the cooking is
completed to clear all smoke and odors
from the kitchen.
Entire button covered and lightly touched.
CORRECT
Button is NOT completely covered
.
INCORRECT
10. RANGE HOOD OPERATION
OIL TUNNEL:
Drop oil tunnel into
the inside hood body slot.
1. Angle (higher point) baffle filter
toward side of hood (oil tunnel
side).
2. Lift the lower angle of the baffle
filter up above horizontal level.
3. Slide (backward) forward into slot.
To remove the baffle, please
reverse the process.
