background image

www.XtremeAirUsa.com

                                                                    PAGE 

7

 

 

A.    A

CTIVATING 

N

ORMAL 

B

LOWER 

F

UNCTION

While the range hood is off,   
                    Touch 

(+) to start from lowest speed, F1 

                   

Touch 

(-) to start from Highest speed, F4 

Touch (+) or (-) again to change the blower speed as indicated in LCD panel 

 
B.    Activating Light Function: 

 
Touch 

Light 

button to turn the lights on or off.   

 

C.    Activating Power-Off Delay Function: 

1.  While the range hood is on and the blower is running in normal mode, touch 

Power-Off Delay 

button to activate delay off timer.   

2.

  Adjust to desired period of delay of timer by touching (-)

 

or (+)

 

button quickly (1-15 minutes). Timer begins to countdown immediately, when it       

reaches 0, the blower will shut off.

 

3.

  Display screen will show flashing clock if timer is working.

 

 
D.    Activating Smoke Detector Function: 

                                While the machine is off, touch 

Auto Function 

button to activate the smoke detector auto function mode.   

  NOTE: this function will only worked when there’s a lot of smoke.    Once this button is touched, all other buttons are not active. 

 

E.    Changing the clock (only available in some models) 

          While the blower is off: 

          1. Touch power sign once. The hour indicator will be flashing. 
          2. Use (+) or (-) to adjust to the desired hour. 
          3. Touch power sign again for the “minutes”. Indicator will be flashing. 
          4. Use (+) or (-) to adjust to desired minutes. 
          5. Touch power sign again to clear the screen. Touch light button to validate. To check time, touch light button. 
              NOTE: The clock display is only available for product manufactured after October 2013. 

 
 
 

F.    Remote Control Sensor: 

1.

  Remote control sensor receives infrared (IR) signal from the remote control. The maximum distance for IR data transmission is 10 

feet and requires direct line of sight. The transmission distance may vary depending on temperature and remote control battery 
condition.

 

2.    Light settings are independent from other settings (including power-off delay) and lights have to be manually turned on or off.   

3.

  The system saves user configurations, settings such as light, timer and blower (motor) speed will remain the same the next time it is   

 

    turned on. 

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

 

00 = blower off 
F1 = quiet speed 
F2 = low speed 
F3 = medium speed 
F4 = high speed 

 

 

 

 

 

 

 

 

Summary of Contents for PX14- U30











Reviews: