Maintenance Manual XA41/XA42
AMM-XA42-0040-001 C.00
Page
8
Page date:
Chapter 39
25.09.2018
5
Assemble the throttle control rod in the opposite sequence.
6
Do a functional check of the throttle control.
From serial numbers 08 and 151 on, or after performing SB-2017-014:
To remove the panel:
1
Loosen and remove the screws around the panel.
2
Lift the panel.
3
Disconnect all wiring, refer to chapter 91-10-00.
4
Remove the panel.
5
Reassemble in reverse order. Secure the cables as required with tie wraps
To remove the trim switch after removal of the panel:
1
Loosen and remove the nut on the bottom side of the panel.
2
Remove the trim switch.
3
Reassemble in reverse order. Perform a functional check of the trim control.
To remove the LED scale after removal of the panel:
1
Remove the plastic label around the led indicator
2
Carefully drill out the two rivets holding the LED scale
3
Reassemble in reverse order. Perform a functional check of the trim control.
Summary of Contents for XA41
Page 281: ...Maintenance Manual XA41 XA42 AMM XA42 0040 001 C 00 Page 18 Page date Appendix 24 09 2018 ...
Page 282: ...Maintenance Manual XA41 XA42 AMM XA42 0040 001 C 00 Page date Page 19 24 09 2018 Appendix ...
Page 283: ...Maintenance Manual XA41 XA42 AMM XA42 0040 001 C 00 Page 20 Page date Appendix 24 09 2018 ...
Page 284: ...Maintenance Manual XA41 XA42 AMM XA42 0040 001 C 00 Page date Page 21 24 09 2018 Appendix ...
