11
Changing the Specific BackTrack Settings
1. Turn on the unit as shown previously and make
sure any BackTrack device used is paired with
the Apple Device as previously described.
2. Tap one of the BackTrack
devices on the screen to go
to its Setting screen.
3. Tap the
Out of Range
switch to turn this option
ON or OFF. Turning this
option on will alert the user
as he is approaching the
out of range barrier for the
connected peripheral.
4. Tap the
Low Battery
switch
to turn this option ON or OFF. Turning this option
on will alert the user when the battery level on
the connected BackTrack device is low.
NOTE:
This alert is a phone notification.
5. Tap on the name (next to the image) to edit the
name of the selected BackTrack device.
6. Tap the image to bring up
the Image Picker screen.
Select a picture to use as the
BackTrack device's image as
follows:
a. Tap a preset picture.
b.
Tap
Choose Photo from
Library
button to chose a
picture from your Apple
Device's library.
c.
Tap
Take Photo
button to take a picture using
the Apple Device.
7. Tap the
Forget This Device
button to delete the
selected BackTrack device.
NOTE:
This option only appears when the device is
disconnected.
Imation Confidential - Use Only By Permission
Controlled material extracted from Matrix on Aug 29, 2012
05:00:45 PM CDT [Bundled with Packaging Configuration 99-
0000-2257-6 A]
