background image

OF  NOTE 

PLEASE READ THE FOLLOWING  CAREFULLY 

THE  MANUFACTURER  AND/OR  DISTRIBUTOR  HAS  PROVIDED  THE  PARTS  LIST  AND  ASSEMBLY 

DIAGRAM  IN  THIS  MANUAL  AS  A  REFERENCE  TOOL  ONLY.  NEITHER  THE  MANUFACTURER  OR 

DISTRIBUTOR MAKES ANY REPRESENTATION OR WARRANTY OF ANY KIND TO THE BUYER THAT HE 

OR SHE IS QUALIFIED TO MAKE ANY REPAIRS TO THE PRODUCT,  OR THAT HE OR SHE IS QUALIFIED 

TO REPLACE ANY PARTS  OF THE PRODUCT.  IN FACT, THE MANUFACTURER AND/OR DISTRIBUTOR 

EXPRESSLY  STATES  THAT ALL  REPAIRS  AND  PARTS  REPLACEMENTS  SHOULD  BE  UNDERTAKEN 

BY  CERTIFIED  AND  LICENSED  TECHNICIANS,  AND  NOT  BY  THE  BUYER.  THE  BUYER  ASSUMES 

ALL RISK AND  LIABILITY ARISING  OUT  OF  HIS  OR  HER  REPAIRS  TO  THE  ORIGINAL PRODUCT  OR 

REPLACEMENT PARTS THERETO, OR ARISING OUT OF HIS OR HER INSTALLATION OF REPLACEMENT 

PARTS THERETO. 

Record  Product's Serial Number Here:  _________________ _ 

Note:  If  product has no serial number, record month and year of  purchase instead. 

Note: Some parts are listed and shown for illustration purposes only and are not available 

individually as replacement parts. 

Questions, issues or  missing parts? 

Before returning to your retailer, our customer seivice team is here to help. 

Call Us: 909.628.0880 

Email Us: customer@xtremepowerusa.com 

Hours of Operation:  9am - 3pm PST Monday - Friday 

MADE IN  CHINA 

Summary of Contents for 42CC












Reviews: