CARING FOR YOUR POOL CLEANER
IF CLEANER STOPS RUNNING
1. Make sure the pool pump is off. Remove the
Pool Cleaner
from the pool and disconnect the cleaner from the
hose.
2. If you try to rotate the wheels and they don't move, check if anything is clogged inside the cleaner.
To open:
a. Place Compass on a flat surface and gently loosen the buttons on the front and back sides of the
cleaner to free the cover as shown in Figure 8.
b. Remove the
Cover
of your cleaner.
c. Next remove the
Shroud
by placing a screwdriver under the small clip that holds it in place. Gently turn
until
Shroud
can be removed.
d. Remove any debris that is present around the gears and turbine.
e. Reverse the process to reassemble your
Cleaner.
Figures
On
a
flat surface
Unsnap and
remove the cover
Remove shroud
to clean out debris
as needed
9
