31
4.2
Manual Record
4.2.1 Live Viewing
After you logged in, the system is in live viewing mode. You can see system date, time and
channel name. If you want to change system date and time, you can refer to general settings
(Main Menu->Setting->General). If you want to modify the channel name, please refer to the
display settings (Main Menu->Setting->Display)
4.2.2
M
a
nual record
Note:
You need to have proper rights to implement the following operations. Please make sure the
HDD has been properly installed.
4.2.2.1 Manual record menu
There are two ways for you to go to manual record menu.
z
Right click mouse or in the main menu, Advanced->Manual Record.
z
In live viewing mode, click record button in the front panel or record button in the remote control.
Manual record menu is shown as in
X295H295H295H302H
Figure 4-5
X
.
4.2.2.2 Basic operation
There are three statuses: schedule/manual/stop. Please highlight icon
“○”
to select
corresponding channel.
z
Manual: The highest priority. After manual setup, all selected channels will begin ordinary
recording.
z
Schedule: Channel records as you have set in recording setup (Main Menu->Setting->Schedule)
z
Stop: All channels stop recording.
Figure 4-5
4.2.2.3 Enable/disable record
Please check current channel status: “
○
” means it is not in recording status, “
●
” means it is in
recording status.
You can use mouse or direction key to highlight channel number. See
X296H296H296H303H
Figure 4-6
X
.
1
Recording status
3
Video loss
2
Motion detection
4
Camera lock
