68
Figure 5-27
5.5.1 HDD Management
Here is for you to view and implement hard disk management. See
X383H383H383H
Figure 5-28.
You can see current HDD type, status, capacity and record time. When HDD is working properly,
system is shown as O. When HDD error occurred, system is shown as X.
You can select HDD mode from the dropdown list such as read-only or you can erase all data in the
HDD.
Please note system needs to reboot to get all the modification activated.
Figure 5-28
Click alarm set button, the interface is shown as below. See
X384H384H384H
Figure 5-29.
X
(This interface is just like
the abnormity setup). Please refer to chapter 5.5.2 for detail information.
Please highlight icon
to select the corresponding function.
