16
System Setup
5.1 Basic configuration
Basic configuration includes three sub menus: system, date & time and DST.
5.1.1 System
①
Go to Main Menu
Setup
Basic
System. Refer to Fig 5-3.
Fig 5-3 Basic Configuration-System
②
In this interface you can set up the device name, device ID, video format, max network
user, VGA resolution and language. The definitions for every parameters display as
below:
Device Name
: The name of the device as it may display on the client end or on
HDS
, this
would help the user to recognize the device remotely.
Device ID
: This ID is used to map the NVR with speed dome cameras.
Video Format
: Two modes: PAL and NTSC. User can select the video format according to
the cameras being used.
Password Check
:
If enabled
the user would need to input the user name and the password for
performing corresponding operations.
Show System Time
: If selected, displays the current time during live monitoring.
Max Online Users
: To set the maximum number of concurrent user logins in the NVR.
Show wizard
: If selected, the GUI would launch the startup wizard on every boot, allowing
