31
Fig 5-24 Network Configuration-Email
SMTP Server/Port:
The name and port number of SMTP server. You can set up SSL check
(such as Gmail) according to actual needs.
5.6.3 Server
This function is mainly used for connecting
HDS
. The setting steps are as follows:
①
In the server interface, select “Enable” as shown in the Fig 5-25.
②
Check the IP address and port of the transfer media server in the
HDS
. The
default
server port for auto report is 2009. If it is modified, please go to the transfer
media
interface to check.
③
Enable the auto report in the
HDS
when adding a new device. Then self-define
device
ID and input the remaining information of the device in the
HDS
.
④
Input the above-mentioned server IP, server port and device ID in the server interface.
Then click “Apply” button to save the setting. Now, the
HDS
system will
automatically connect this device.
Fig 5-25 Network Configuration-Server
5.6.4 NAT
①
Go to Main Menu
Setup
Network
NAT interface. Refer to Fig 5-26.
②
Enable NAT and input the NAT Server (The default NAT Server is
www.autonat.com
).
③
Click “Apply” to save the settings.
