32
Fig 5-26 Network Configuration-NAT
5.6.5 Other Settings
If your NVR is set to use PPPoE as its default network connection, you may set DDNS to be
used in connection. The setting steps are as follows:
①
Enable DDNS server.
②
Select DDNS server.
③
Enter user name, password and host domain name of the registered website.
④
Click “Test” button to test the effectiveness of the relevant information.
⑤
Click “Apply” button to save the setting.
Fig 5-27 Network Configuration-Other Settings
Note:
The domain name selected by user is a banding domain name of NVR. User
should logon the website provided by the server supplier to register a user name and
password and then apply for a domain name online. After the successful application,
user can access the device from the IE client by inputting that domain name.
Enable UPnP:
Select UPnP here and then enable UPnP function in your router. Therefore,
there is no need for you to forward LAN IP address and port in the router in connection of
internet.
Domain name Registration
（
Take
www.dvrdydns.com
for example
）
