1. Your tool has been designed to operate over a long
period of time with a minimum of maintenance.
2. Continuous satisfactory operation depends upon
proper tool care and regular cleaning.
3. When not in use the drill should be stored in a dry,
frost-free location not within the reach of children.
4. Keep ventilation slots of the drill clean at all times and
prevent any foreign matter from entering.
5. If the housing of the drill requires cleaning do not use
solvents but a moist soft cloth only.
Note:
Ozito Industries will not be responsible for any
damage or injuries caused by repair of the tool by an
unauthorised person or by mishandling of the tool.
If the supply cord of this power tool is damaged,
it must be replaced by a specially prepared cord
available through the service organization.
WARRANTY
YOUR WARRANTY FORM SHOULD BE RETAINED BY YOU AT ALL TIMES. IN ORDER TO MAKE A
CLAIM UNDER THIS WARRANTY YOU MUST RETURN THE PRODUCT TO YOUR NEAREST BUNNINGS
WAREHOUSE WITH YOUR BUNNINGS REGISTER RECEIPT. PRIOR TO RETURNING YOUR PRODUCT FOR
WARRANTY. PLEASE TELEPHONE OUR CUSTOMER SERVICE HELPLINE:
Australia 1800 069 486
New Zealand 0508 069 486
TO ENSURE A SPEEDY RESPONSE PLEASE HAVE THE MODEL NUMBER AND DATE OF PURCHASE
AVAILABLE. A CUSTOMER SERVICE REPRESENTATIVE WILL TAKE YOUR CALL AND ANSWER ANY
QUESTIONS YOU MAY HAVE RELATING TO THE WARRANTY POLICY OR PROCEDURE.
The benefits provided under this warranty are in addition to other rights and remedies which are available to you at
law.
Our goods come with guarantees that cannot be excluded at law. You are entitled to a replacement or refund for a
major failure and for compensation for any other reasonably foreseeable loss or damage. You are also entitled to
have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to
a major failure.
Generally you will be responsible for all costs associated with a claim under this warranty, however, where you have
suffered any additional direct loss as a result of a defective product you may be able to claim such expenses by
contacting our customer service helpline above.
1 YEAR REPLACEMENT WARRANTY
Your product is guaranteed for a period of 12 months from the original date of purchase and is intended for DIY (Do It
Yourself) use only. If a product is defective it will be replaced in accordance with the terms of this warranty. Warranty
excludes consumable parts, for example: nozzles.
WARNING
The following actions will result in the warranty being void.
• Professional, Industrial or high frequency use.
• If the tool has been operated on a supply voltage other than that specified on the tool.
• If the tool shows signs of damage or defects caused by or resulting from abuse, accidents or alterations.
• Failure to perform maintenance as set out within the instruction manual.
• If the tool is disassembled or tampered with in any way.
XU1
Australia/New Zealand (Head Office)
1-23 Letcon Drive, Bangholme, Victoria, Australia 3175
5
Drilling in wood
1. Move the mode selector to the right (drill bit icon) to
select the drill mode.
2. Mark the place where you want to drill with a punch
or nail.
3. To avoid splintering on breakthrough either clamp a
piece of scrap wood to the back of the work piece
or continue the hole from the back of the work piece
when the drill bit first breaks though.
Hammer drilling in masonry
1. Move the mode selector to the left (hammer icon) to
select the hammer mode.
2.
Hold the drill firmly and place the bit at the point to
be drilled.
3. Depress the switch to start the drill
4. Move the drill bit into the work piece applying only
enough pressure to keep the bit cutting
Note:
Do not force the drill or apply side pressure to
elongate a hole. Let the drill and bit do the work.
5. If the bit jams in the work piece or if the drill stalls,
stop the tool immediately. Remove the bit from the
work piece and determine the reason for jamming.
MAINTENANCE
WARNING!
Before performing any
maintenance, switch off and disconnect from the
mains supply.
