4
Getting Started
1. Pull out the tab from behind the
iPad sleeve. Line up your iPad
with the sleeve, making sure that
the rear camera lines up with the
corresponding hole in the iPad case.
2. Insert the iPad into the sleeve
(Figure 3)
, and secure it by fitting
the tab between the iPad and
the case.
(Figure 4)
3. To convert the case to a stand for
viewing and working, open the folio
so the iPad is at a right angle to the
keyboard.
4. Pull the bottom of the iPad away
from the case, so it leans securely
against the keyboard . If the outer
tab is obstructing the screen, you
can tuck it in between the sleeve
and the case.
5. Remove the keyboard from the
case if you want to control the iPad
remotely, or if you want to pair the
keyboard with a different Bluetooth
device. You can use the keyboard
from up to 33 feet (10 m) away.
When replacing the keyboard in the
case, make sure to line it up with the
integrated magnets on the inside of
the folio.
6. You can detach the iPad sleeve to
use it as a standalone iPad case. To
reattach the sleeve to the folio, line
up the two hook-and-loop strips and
firmly press the sleeve and the case
together.
Getting Started
Figure 3
Figure 4
When replacing the keyboard
in the case, make sure to fit
the tab behind the keyboard
to hold it in place.
